Find the Right Sump Pump

Finding the right sump pump for your home is an important process.  Every home is different so selecting the proper pump will vary for each person.  There are many factors to consider and you want to make sure you have the proper equipment just in case there is a water problem in your home.  Here are some of the factors to consider: Type of Foundation: Every home is built differently and installing a sump pump that fits is important.  If the house resides on a hill then it could affect the type of pump you purchase. Installing a Backup: A sump pump system with a backup comes in handy if your system malfunctions.  These battery power back-ups are perfect for emergency situations and respond instantaneously by activation or an alarm system. Installing a backup system should not send warning flags on the quality of the pump but merely as a precaution.  Most pumps are built and designed to last a while. A sump pump with a battery backup such as the Sta-Rite DB20018T will stop water from entering your basement in the following instances:Sump_Pump_Battery_Backup
  • Power outages
  • Main pump is deactivated
  • Main pump malfunctions
  • Main pump cannot keep up with the level of water in your basement
  • Circuit breaker trips
Type of Switch:  The type of switch that you choose will dictate when the pump needs to start pumping water out of your basement.  The three types of switches are: Float Switch – The float switch is activated when rising water hits a predetermined level triggering the switch. Diaphragm Switch – Called the diaphragm switch because it has a diaphragm that changes shapes with the change in volume of water within the sump pit.  When the water pressure in the pit increase it changes the diaphragm’s shape and the pump is turned on. Electronic Switch – This switch is turned on when a water detector activates it at a predetermined level. Power and Voltage:  Just like many appliances, sump pumps come with different levels of power and voltage.  Horsepower ranges from ¼ to 1+ so it is best to determine how much power you would need for your basement.  Choices of voltage range from 115 volt, 230 volt, and 460 volt and in single or three phase settings.  Cord length also factors in here if your pump needs to be plugged into an outlet.  Evaluate the layout of your basement before deciding on the appropriate cord length with your pump.  
Enhanced by Zemanta

Share: