Currently viewing the category:
"Pond Pump Basics"
Tsurumi Pump’s “TM” series (50TM2.4S & 50TM2.75S) are constructed from Titanium and specifically designed for salt water applications. TsurumiPumpSales.com has replaced numerous competitors “Salt Water” pump with the Tsurumi TM Series pump, outlasting the competitors 10 to1. Some of the customers who have switched to the Tsurumi TM series are: Seaworld, Brooklyn Aquarium & Atlanta Aquarium. [...]
Pond Pump season is around the corner and there a few quick tips that would save/extend the life of your pump: As in all previous posts, when you are not using your pump, you should clean and store the pump in a warm & dry location. Before you reinstall the pump, locate the phillips head [...]
Tsurumi pond pumps are know throughout the industry as “best of breed” but, what makes Tsurumi pond pumps a top choice over other companies? Lets take a look into the engineering advantages Tsurumi pumps have on their competitors: Tsurumi pond pumps have dual inside mechanical with Silicon Carbide vs. Ceramic bottom faces. Silicon carbide seals are [...]
95% of Tsurumi pond pump failures are not caused by the pump failing, rather because the pond pump was incorrectly sized by the pond installer. This is the correct way to size a pond pump: Pond pumps should not be sized only on the basis of GPH or GPM (Gallons Per Hour or Gallons Per [...]
Tsurumi pond pumps are known to be the best in the industry. It’s failure rate is second to no other company in the pond pump market. The key to prolong the life of Tsurumi pond pumps is maintaining the pump in the correct way. If the pond pump is not in use for the the [...]
